AWS MTMDP-2S Multi-Range Torque Tester with any 2 Transducers up to 1000 lbf-in
Similar Products to Consider
The AWS MTM Multi-Channel Digital Torque Tester are designed to provide a precise and economical way to measure and calibrate a wide range of torque tools including manual and powered screwdrivers and wrenches*. Historically, transducers had to be purchased individually and connected to a display via a switch box or a group of cables. With the MTM, up to 4 transducers can be integrated into one compact housing. An external transducer can be connected to further increase the measuring range (requires optional external input).
The small footprint also allows for a clean, well-organized workspace. This helps eliminate the endless searching for cables, adapters, and other accessories that may be needed.
Features such as independent CW and CCW calibration, multi-point linearization, metrology grade transducer shafts, and overload protection to 200% of full scale are standard. All of the above translate to a better product for you at an unbeatable price.
- *Power tools require the use of a Run-Down-Fixture
- **Not for use with Impact Tools and Torque Multipliers
Kit Contents
- AWS MTM Multi-Channel Digital Torque Tester
- AC adapter/Charger
- Operating Manual
- NIST Traceable calibration certificate with data
- Warranty 1 (one) Year
* Rundown Adaptor (Joint Simulator) Included with 1/4" & 3/8" drive size models
Features
- Includes NIST Traceable calibration certificate with data for each transducer
- Run-Down-Fixture (Joint Simulator) included with 1/4" and 3/8" transducers (1-10)
- Selectable units of: Ft-lb, IN-lb, IN-oz, KGF-m, KGF-cm, GF-cm, CN-m, N-m
- Available with 2, 3 or 4 torque transducers
- Small footprint of the MTM allows for a clean, well-organized work space
- 200% Overload protection
- LED Indicator Shows Active Transducer
- Connect external transducers with optional input jack
- Replaceable shaft design. If one shaft is damaged, replace that shaft, not the entire unit.
- Hi-Lo Limits for Go-NoGo testing of tools
- Accuracy of 0.5% of Indicated Value (within calibrated range)
- For Testing According to ISO 6789:2017
Specifications
| Calibrated Range | 10-100% Full Scale, bi-directional(Standard) |
| Extended Range | 5-100% Full Scale, bi-directional(ER Option) |
| Accuracy | 0.5% of indicated value (within calibrated range) |
| Resolution | 4 Active Digits |
| Overload Protection | 200% Full Scale bi-directional |
| Operating Modes | Track, Peak, 1st Peak |
| Filtering | Selectable; 125Hz, 250Hz, 500Hz, 1000Hz, 1500Hz and 2000Hz |
| Memory | data storage of up to 999 readings |
| Data Output | RS-232 |
| Display | 62 x 62mm backlit LCD |
| Alarm Limits | Panel Mounted LED for Visual Alarm Limits |
| Power | NiMH rechargeable batteries provide 8-10 hours continuous use |
| Weight | 6-12 lbs, depends on number of transducers and configuration |
| Operating Temp | 32 - 120 F (0-50 C) |
| Warranty | 1 Year |
| Calibration Certificate | Includes NIST Traceable calibration certificate with data for each transducer |
| Standard Accesories | Joint Simulator for 1/4" & 3/8" drives, AC adapter/Charger |
| Optional Accessories | Joint Simulators for 1/2", 3/4" & 1" Transducers, Extended Ranger "ER" Option |
Torque Ranges
| Model | Range | Drive Size | Run-Down Fixture |
| ITIO-10 | 1 - 10 Oz-in | 1/4" | Included |
| ITIO-50 | 5 - 50 Oz-in | 1/4" | Included |
| ITIO-100 | 10 - 100 Oz-in | 1/4" | Included |
| ITI-10 | 1 - 10 Lb-in | 1/4" | Included |
| ITI-25 | 2.5 - 25 Lb-in | 1/4" | Included |
| ITI-50 | 5 - 50 Lb-in | 1/4" | Included |
| ITI-100 | 10 - 100 Lb-in | 1/4" | Included |
| ITI-250 | 25 - 250 Lb-in | 3/8" | Included |
| ITI-500 | 50 - 500 Lb-in | 3/8" | Included |
| ITF-100 | 10 - 100 Lb-ft | 1/2" | Optional |
| ITF-150 | 15 - 150 Lb-ft | 1/2" | Optional |
| ITF-250 | 25 - 250 Lb-ft | 1/2" | Optional |
| ITF-750 | 75 - 750 Lb-ft | 3/4" | Optional |
- *ITIO-10 accuracy is +/-1% from 10-100% of capacity
- Additional transducers can be attached via the optional external input port.
- All 1/4" and 3/8" Drive transducers are supplied with run-down fixtures.
- Don't see the range you need Custom ranges are available, please call 888-275-5772 to discuss your application.
- ER - Extended Range Option increases certified range to 5-100% (instead of 10-100%)
MTM Example Configuration
Example of MTMDP-3S with 3 transducers
This system has an overall range of:
1 - 1000 lb-in / 0.1 - 83 lb-ft / 0.1 - 112 Nm
using the following 3 transducers:
- 4. ITI-10: 1 - 10 lb-in, 1/4 Drive
- 7. ITI-100: 10 - 100 lb-in, 1/4 Drive
- 10. ITI-1000: 100 - 1000 lb-in, 3/8 Drive
The part # for the above configuration would be MTMDP-3S-4-7-10
Torque Loader - Sold Seperately
The AWS-1000 series mechanical torque wrench loaders are designed for use with our IT Transducers, MTM and TT-QCM torque testers. These precision torque loaders allow operators to precisely test and calibrate torque wrenches up to 1000 lb-ft / 1350 Nm with measuring accuracy up to 0.25% of indicated readings, satisfying metrology lab requirements while providing the durability required for production environments.
An optional motor kit allows for automated testing, improving speed and repeatability.
MTM Model Selection Guide
S Models Any transducer 1/4" or 3/8" Drive (up to 1000 lb-in / 112 Nm Capacity)
L Models Any transducer 1/2" Drive or larger (100 lb-ft / 135 Nm Capacity)
Related Products
AWS TT-3000 / AWS-3000 Desktop Torque Tester
- 0.5% Accuracy of indicated reading from 10-100% of the capacity (Bidirectional), 0.25% Optional
AWS RDF
Run Down Fixture - Joint Simulators for Torque Testers
- Threaded bolt and nut body for simulating bolted joint. On Standard, HD and HE models bolt is standard and easily replaceable from multiple sources
AWS AWS-1000 Series Mechanical Torque Wrench Loader
- The AWS AWS-1000 series mechanical torque wrench loaders are designed for use with our IT Transducers, MTM and TT-QCM torque testers
AWS Series IT Static Bench Mounted Torque Transducers
- Designed to work with the torque analyzers and data collectors, the AWS IT high-strength aluminum integrated bench stands mount directly to a benchtop
AWS TTCA Torque Arms, Calibration Arms, Torque Wheels
- Are designed for calibration and verification of torque measuring equipment. They can be used by metrology labs and QC departments to test and adjust torque torque transducers and sensors.
AWS TT-DA Torque Drive Adapters
- The AWS TT-DA Torque Drive Adapters are Precision drive adapters for torque measurement equipment. Adapters do not have ball detents
Downloads
 | AWS MTM Multi-Channel Digital Torque Tester - Data Sheet |
| AWS MTM Multi-Channel Digital Torque Tester - Instruction Manual |
| AWS MTM-2 Multi-Channel Digital Torque Tester - Dimensions |
| AWS MTM-4 Multi-Channel Digital Torque Tester - Dimensions |
