Force and Torque Measurement Instruments

Mark-10 G1002 Dual Roller Cam Grip

Mark-10 G1002 Dual Roller Cam GripPull testing of wires, tubes, and other slender samples200 lb capacity

The Mark-10 G1002 Dual Roller Cam Grip is used with a G1001 wire terminal grip, force gauge, and test stand to create a complete terminal and crimp testing system. This cam grip secures the ends of wire, cable, and tubing samples for pull testing. Engaging and disengaging samples is quick and easy, with a side slot for sample insertion and serrated steel rollers.

Please click on the links below for additional information on the models available for this product:

Imada WG-1 / WG-2 Wire Terminal Grips

Imada WG-1 / WG-2 Wire Terminal GripsManufacturer: ImadaWarranty: One Year

The Imada WG-1 / WG-2 Wire Terminal Grip is a wire terminal grip that secures the wire terminal without gripping the wire jacket for pull tests. Spring loaded 20mm jaws open to 5mm.

Please click on the links below for additional information on the models available for this product:

Mark-10 Series R04 Miniature S-Beam Force Sensor

Mark-10 Series R04 Miniature S-Beam Force Sensor8 Ranges up to 100 lbsManufacturer: Mark-10Warranty: One Year

The Mark-10 Series R04 Miniature S-Beam Force Sensor is an extremely compact force measurement sensors for tensile and compressive loads in applications with limited space. The Mark-10 Series R04 Miniature S-Beam Force Sensor is available in capacities from 0.25 to 100 lbF (1 to 500 N). Every capacity has the same miniature dimensions. The sensors feature outstanding mechanical overload protection and threaded holes on two sides for the mounting of attachments or implements.

Please click on the links below for additional information on the models available for this product:

AWS TT-QC-CC Waterproof Carrying Case for AWS-QC

AWS TT-QC-CC Waterproof Carrying Case for AWS-QCManufacturer: ChecklineWarranty: One Year

The AWSV TT-QC-CC is the protection to send your AWS TT-QC into even the most severe conditions.

Please click on the links below for additional information on the models available for this product:

Seekonk TS-Series Dial Torque Wrench

Seekonk TS-Series Dial Torque WrenchRigid Frame Dial Type Torque WrenchCapacities from 600 in-lbs to 600 ft-lbs1/4, 3/8, 1/2 or 3/4 Inch Drive

The Seekonk TS Series dial torque wrenche is designed for precision torque measurement and application. Built with chrome plated high alloy steel, TS series wrenches are rugged and durable. These tools feature a torsional bar system manufactured from a special molybdenum alloy steel that is electronically heat treated to exacting standards. Mated to these exclusive torsional elements are precision Swiss made dial indicators resulting in uncompromised accuracy, even after years of service. Seekonk TS Series dials are uncomplicated and simple to read thereby eliminating errors so common in other brands. Standard accuracy is +/- 3% of indicated value. Conforms to Federal Specification GGG-W-00686C. All tools are manufactured in the USA and are shipped with complementary NIST certs.

Please click on the links below for additional information on the models available for this product:

Imada Cedar Series I Torque Calibrators for Non-Impact Power Drivers & Manual Wrenches

Imada Cedar Series I Torque Calibrators for Non-Impact Power Drivers & Manual Wrenches 3 ranges up to 130 lb-inUnits of measure: lb-in, oz-in, kg-cm, N-cm and N-m (selectable)USB Data Output

The Imada Cedar Series I Torque Calibrators for Non-Impact Power Drivers & Manual Wrenches is ideal for calibrating electric screwdrivers with torque control. It features peak mode to capture the peak torque achieved during a test, real time mode to display torque transients, and peak down mode to capture critical first peak value. Standard 3/8" drive is good for checking torque wrenches but not impact wrenches. All digital torque testers are sold in kit form complete with tester, hard carrying case, 2 smart driver adapters and AC charger/adapter. Smart driver adapters simulate screw tightening, eliminating the need for reversing the power driver which is required for conventional driver adapters.

Please click on the links below for additional information on the models available for this product:

Mark-10 G1003 Miniature Component Grip Capacity 30 lb

Mark-10 G1003 Miniature Component Grip Capacity 30 lbFor a variety of pull-off tests30 lb capacity

The Mark-10 G1003 Miniature component grip is ideal for testing small and hard-to-reach parts, such as electronic mechanical components. Use this grip with a force gauge and test stand to create a complete testing system.

Please click on the links below for additional information on the models available for this product:

Mark-10 G1027 / G1034 V-groove

Mark-10 G1027 / G1034 V-grooveFor compression testing of round or odd shaped samples 200 lb / 500 lb capacity

The G1027 / G1034 V-groove is ideal for compression testing of round or odd shaped samples. Use them with a force gauge and a test stand to create a complete testing system.

Please click on the links below for additional information on the models available for this product:

Imada SC Small Chucks

Small Chuck Test wire, components, other pull testsManufacturer: ImadaWarranty: One Year

The Imada SC Small Chucks is for test wire, components, other pull tests.

Please click on the links below for additional information on the models available for this product:

Imada WG-3 Multi Terminal Grip

Imada WG-3 Multi Terminal GripMulti terminal grip has 12 wire gauge aperturesManufacturer: Imada

The Imada WG-3 Wire Terminal Grip is a multi terminal grip that has 12 wire gauge apertures (up to 8mm) on the turret. Locate and lock the appropriate size.

Please click on the links below for additional information on the models available for this product: