Mountz 070844 RDA-S0 S-Series Run Down Adapters, 0.3 - 3 lbf.in, 3.4 - 33.9 cN.m, 1.5mm Hex, 1/4 M/Sq
Productos Similares a Considerar
Designed to provide consistent and reliable torque readings for use with power-driven torque control tools
The Mountz S-Series Run Down Adapters is designed to provide run down simulation for a soft joint application. This device operates with the EZTorQ torque analyzers to provide consistent and reliable torque readings for power-driven torque control tools. Run-down adapters are used to simulate various joint characteristics and provide a more accurate torque reading during testing and calibration.
Screw run-down adapters are mounted in-line between the tool drive and the transducer of a EZ-TorQ torque analyzer reducing the impact and irregular peaks that cause poor testing repeatability.
Each Mountz S-Series Run Down Adapters has an effective torque range and will supply repeatable torque data within that range if used correctly. Check out our Selection Guide Chart to select which RDA fits the EZ-TorQ torque analyzer the best
Features
- The unit is designed to provide run down simulation for a soft joint application.
- Designed to provide consistent and reliable torque readings for use with power-driven torque control tools.
- The adapter is mounted inline between the tool's drive and the transducer.
- Compact size and lightweight.
- Operates in a clockwise direction only. After each run down, the RDA should be completely backed-up
Accurate Power Tool Testing
- Provide consistent and reliable torque readings for power-driven torque control tools.
- The screw run adapter is designed to provide run down simulation for a soft joint application.
- RDA is mounted in-line between the tool drive and the transducer of the EZ-TorQ torque analyzer.
- Compact to limit spacing between the power tool and torque measurement equipment for improved accuracy and ease of use.
- Operates in a clockwise direction only. After each run down, the RDA should be completely backed-up
Models Available
| Part Number | Model | American | S.I. | Output Drive | Output Drive |
| 070844 | RDA-S0 | 0.3 - 3 lbf.in | 3.4 - 33.9 cN.m | 1.5mm Hex | 1/4 M/Sq |
| 070845 | RDA-S1.5 | 0.5 - 5 lbf.in | 5.6 - 56.5 cN.m | 2.5mm Hex | 1/4 M/Sq |
| 070835 | RDA-S10 | 1 - 6.1 lbf.in | 11.3 - 68.6 cN.m | 4mm Hex | 17mm Hex |
| 070833 | RDA-S15 | 2.1 - 11.5 lbf.in | 25.5 - 129.5 cN.m | 6mm Hex | 17mm Hex |
| 070834 | RDA-S75 | 6.9 - 52.1 lbf.in | 78.5 - 588.4 cN.m | 6mm Hex | 17mm Hex |
| 070840 | RDA-S200 | 15.6 - 121.5 lbf.in | 1.8 - 13.7 N.m | 6mm Hex | 17mm Hex |
| 070839 | RDA-S400 | 48.6 - 286.4 lbf.in | 5.5 - 32.4 N.m | 10mm Hex | 17mm Hex |
Related Products
Mountz EZ-TorQ III Torque Analyzer
- The Mountz EZ-TorQ III Torque Analyzer is easier and more available across every aspect of the line from the calibration lab to the assembly station. Highly portable and user friendly, this battery powered torque validation hub can be easily carried around the assembly line to spot check tools as part of a QA program or used at assembly stations for quick and easy torque tool validation and calibration
Downloads
 | Mountz S-Series Run Down Adapters - Data Sheet |
| Mountz S-Series Run Down Adapters - Instruction Manual |
| Mountz S-Series Run Down Adapters - Selection Guide Chart |
