Imada MX2-550-S High Performance Motorized Test Stand with Distance Meter, 550 lbs Capacity
Similar Products to Consider
Force Gauge sold Separately
110lb up to 1100lb Capacity
4 Capacities Available:
- Imada MX2-110 110 lbs / 50 Kg / 500 N
- Imada MX2-275 275 lbs / 125 Kg / 1250 N
- Imada MX2-550 550 lbs / 250 Kg / 2500 N
- Imada MX2-1100 1100 lbs / 500 Kg / 5000 N
High Performance, Force Control, Motorized Test Stand with Speed Control, Timer & Cycle Counter
Imada MX2 High Performance Motorized Test Stand use maintenance-free, brushless, DC motors that provide smooth and powerful operation to ensure consistent force testing results.
Precise Increment Mode
Imada MX2 High Performance Motorized Test Stand features a unique jog movement control, for precise increment testing. In jog mode, each click of the program dial moves the cross head approximately .015mm for MX2-110, .01mm for MX2-275 and .05mm for MX2-550, 0.002 for MX2-1100 (standard speed, under no load).
Cycle Mode
MX2 Program dial and LCD interface In cycle mode, automated fatigue tests are easy to setup. Press the unique program dial and turn, to make selections from the menu screens and set mode, speed, test duration, units and cycles. Control start and return speeds independently.
Force Control
Force controlled non-destructive tests are also easy to setup and program. Connect an Imada Z Series force gauge to the MX2 test stand to enable the following force controlled tests and Conditional Overload Prevention.
Maintain Force Between High/Low Setpoints
Initial cross head speed is controlled by the start speed setting. Force control activates when applied force exceeds the low setpoint (and below the high setpoint) on the Z Series force gauge. The cross head maintains that force for the programmed interval and then uses return speed to reset for the next cycle.
Increase Force to High Setpoint and Stop
Initial cross head speed is controlled by the start speed setting. When the applied force reaches the low set point of the Z Series force gauge, the test stand engages the measuring speed setting and stops when the applied force reaches the high set point on the Z series force gauge. Ideal for non-destructive or creep testing. The cycle is repeated until the counter limit is reached
Features
- Ultra rigid, .5mm deflection at maximum load
- Wide speed range: 0.4 11.8 in/min (optional speed ranges available)
- Manual, Increment, Single Cycle, Continuous Cycle and Force Control (with Z Series gauges) selectable
- Force Controlled operation with Imada Z Series force gauges
- Easy-to-use program dial and menu screens control mode, speed, timer and cycles
- Optional digital distance meter available
- Programmable timer up to 99' 59.9 sec in 0.1 sec increments
- Conditional Overload Prevention
- One stand for both compression (push) and tension (pull) tests
- Max clearance 9" (with extender 14")
Specifications
| Travel Rate | Refer to Speed Range Table above |
| Dimensions | See Download Section |
| Compatible Gauges | Imada ZTA Series Digital force Gauge and Imada DST Digital force Gauge |
Ranges
| Model | Capacity | Distance Meter | Stroke | Jog Mode Minimum Movement Distance |
| MX2-110 | 110 lbf | None | 9.4" (240mm) | ~.015mm |
| MX2-110-S | 110 lbf | Standard | 9.4" (240mm) | ~.015mm |
| MX2-275 | 275 lbf | None | 12.2" (300mm) | ~.01mm |
| MX2-275-S | 275 lbf | Standard | 12.2" (300mm) | ~.01mm |
| MX2-550 | 550 lbf | None | 12.2" (300mm) | ~.05mm |
| MX2-550-S | 550 lbf | Standard | 12.2" (300mm) | ~.05mm |
| MX2-1100 | 1100 lbf | None | 12.2" (300mm) | ~.05mm |
| MX2-1100-S | 1100 lbf | Standard | 12.2" (300mm) | ~.05mm |
Speed Ranges
| Model | Speed Range |
| MX2-110 | 0.4 11.8 in/min (10 300 mm/min) |
| MX2-110-V600 | 0.8 23.5 in/min (20 600 mm/min) |
| MX2-110-V90 | 0.1- 3.5 in/min (3 90 mm/min) |
| MX2-275 | 0.4 11.8 in/min (10 300 mm/min) |
| MX2-275-V600 | 0.8 23.5 in/min (20 600 mm/min) |
| MX2-275-V75 | 0.1 2.9 in/min (3 75 mm/min) |
| MX2-550 | 0.4 12 in/min (10 305 mm/min) |
| MX2-550-V75 | 0.1 3.5 in/min (3 75 mm/min) |
| MX2-1100 | 0.02 12 in/min (0.5 300 mm/min) |
Related Products
Imada ZTA Series Digital force Gauge
Imada ZTA-Series Digital Force Gauge Adds Displacement Output with Compatible Stands and Data output Direct to Flash drive. Easy-to-use menus make programming simple in eight languages. Select units, reverse display, set high/low setpoints, and all other functions in plain language.
The Imada DST Digital Force Gauge are simple-to-use basic gauges featuring user-friendly menu operation. Selections including unit and measuring mode can be locked to prevent accidental changes. The large backlit LCD display can be configured in basic format to show value.
Downloads
 | Imada MX2 High Performance Motorized Test Stand Data Sheet |
| Imada MX2 High Performance Motorized Test Stand Instruction Manual |
| Imada MX2 High Performance Motorized Test Stand Dimensions |
